Motion X600 | High-Quality Sound Wireless Speaker
179,99€
Motion X600 | High-Quality Sound Wireless Speaker
poster
Spatial Audio Fully Water Proff AUX in Hi-Res Portable 3 Colors 50W Powerful Sound
Spatial Audio Fully Water Proff AUX in Hi-Res Portable 3 Colors 50W Powerful Sound

FAQ

  • What's in the box?
    Motion X600 Speaker
    60 cm USB-C to C Cable
    Safety Card
    Quick Start Guide

    Note: Aux cable and wall charger are not included!
  • How long does it take to charge Motion X600?
    It takes around 6 hours to charge with a certified 5V/3A wall charger.
  • How do I reset Motion X600?
    Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
  • Is Motion X600 waterproof?
    Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • Does Motion X600 have a built-in microphone?
    Yes.
  • Can I get stereo sound when using one Motion X600?
    Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
  • Why is the battery life less than 12 hours?
    12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
  • Where can I download the soundcore app?
    Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

    1. Customizable EQ
    Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

    2. LDAC Mode
    Use the app to switch to LDAC mode (only available on Android 8.0 and above).
  • How do I turn off Motion X600's voice prompts?
    1. Connect your device to Motion X600.
    2. Download and open the soundcore app.
    3. Press the top right corner to access more options.
    4. Turn off voice prompts.
  • How do I update Motion X600's firmware?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app, then press Update Firmware.
    3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
    4. Motion X600 will restart automatically after updating successfully.
  • Does spatial audio require a specific music format?
    No.
  • What is spatial audio and how do I turn it on?
    Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
  • What is LDAC?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

    Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
  • How do I use LDAC?
    On a device powered by Android 8.0 or above, do the following:
    1. Open the soundcore app.
    2. Go to the Settings
    3. Click on Sound Mode
    4. Select Preferred Audio Quality and switch to LDAC codec.

    Notes:
    • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
    • LDAC provides higher quality sound but increases power consumption and reduces playtime.
    • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
  • Why do some devices experience interrupted sound when using the LDAC function?
    After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

    If you would like to select 990 kbps LDAC, we recommend following these steps:

    1. Turn off Wi-Fi on your Android device.
    2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
    3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
    4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
    5. Play local music files.
  • How can I TWS pair two Motion X600 speakers at the same time?
    Method 1.
    1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The master speaker is the one with the blue light.
    6. Use the master speaker to pair with your device.

    Method 2.
    1. Long press the power button to start both speakers
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

    Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
  • How does stereo sound work during TWS pairing?
    When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
  • I can't detect Motion X600 via Bluetooth. What should I do?
    1. Fully charge the speaker.
    2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    3. Turn your device and your device's Bluetooth off and on.
    4. Clear all pairing records on your device.
    5. Restart your speaker and reconnect to it.
    6. Try the speaker with different devices if possible.
  • How do I use the EQ?
    Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
  • Can I increase the bass on my Motion X600?
    You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
  • How can I share a custom EQ?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app.
    3. Click Equalizer.
    4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

    Note: To use the sharing function, you need to log in to your soundcore account first.
  • How do I import a custom EQ that someone has shared with me?
    Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
    Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
    Click "Yes" and then click "Import".

    Method 2: Scan the QR Code
    Open the soundcore app and pair with Motion X600.
    Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
  • QSG

    A3130-QSG

    2023-05-08

  • Manual

    A3130-Manual

    2023-05-08

    • What's in the box?
      Motion X600 Speaker
      60 cm USB-C to C Cable
      Safety Card
      Quick Start Guide

      Note: Aux cable and wall charger are not included!
    • How long does it take to charge Motion X600?
      It takes around 6 hours to charge with a certified 5V/3A wall charger.
    • How do I reset Motion X600?
      Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    • Is Motion X600 waterproof?
      Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • Does Motion X600 have a built-in microphone?
      Yes.
    • Can I get stereo sound when using one Motion X600?
      Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
    • Why is the battery life less than 12 hours?
      12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Where can I download the soundcore app?
      Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

      1. Customizable EQ
      Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

      2. LDAC Mode
      Use the app to switch to LDAC mode (only available on Android 8.0 and above).
    • How do I turn off Motion X600's voice prompts?
      1. Connect your device to Motion X600.
      2. Download and open the soundcore app.
      3. Press the top right corner to access more options.
      4. Turn off voice prompts.
    • How do I update Motion X600's firmware?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app, then press Update Firmware.
      3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
      4. Motion X600 will restart automatically after updating successfully.
    • Does spatial audio require a specific music format?
      No.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

      Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
    • How do I use LDAC?
      On a device powered by Android 8.0 or above, do the following:
      1. Open the soundcore app.
      2. Go to the Settings
      3. Click on Sound Mode
      4. Select Preferred Audio Quality and switch to LDAC codec.

      Notes:
      • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
      • LDAC provides higher quality sound but increases power consumption and reduces playtime.
      • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • Why do some devices experience interrupted sound when using the LDAC function?
      After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

      If you would like to select 990 kbps LDAC, we recommend following these steps:

      1. Turn off Wi-Fi on your Android device.
      2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
      3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
      4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
      5. Play local music files.
    • How can I TWS pair two Motion X600 speakers at the same time?
      Method 1.
      1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
      2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
      3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
      5. The master speaker is the one with the blue light.
      6. Use the master speaker to pair with your device.

      Method 2.
      1. Long press the power button to start both speakers
      2. Connect either speaker with your Bluetooth device.
      3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

      Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
    • I can't detect Motion X600 via Bluetooth. What should I do?
      1. Fully charge the speaker.
      2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
      3. Turn your device and your device's Bluetooth off and on.
      4. Clear all pairing records on your device.
      5. Restart your speaker and reconnect to it.
      6. Try the speaker with different devices if possible.
    • How do I use the EQ?
      Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
    • Can I increase the bass on my Motion X600?
      You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
    • How can I share a custom EQ?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app.
      3. Click Equalizer.
      4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

      Note: To use the sharing function, you need to log in to your soundcore account first.
    • How do I import a custom EQ that someone has shared with me?
      Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
      Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
      Click "Yes" and then click "Import".

      Method 2: Scan the QR Code
      Open the soundcore app and pair with Motion X600.
      Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
    • QSG

      A3130-QSG

      2023-05-08

    • Manual

      A3130-Manual

      2023-05-08

  • What's in the box?
    Motion X600 Speaker
    60 cm USB-C to C Cable
    Safety Card
    Quick Start Guide

    Note: Aux cable and wall charger are not included!
  • How long does it take to charge Motion X600?
    It takes around 6 hours to charge with a certified 5V/3A wall charger.
  • How do I reset Motion X600?
    Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
  • Is Motion X600 waterproof?
    Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • Does Motion X600 have a built-in microphone?
    Yes.
  • Can I get stereo sound when using one Motion X600?
    Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
  • Why is the battery life less than 12 hours?
    12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
  • Where can I download the soundcore app?
    Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

    1. Customizable EQ
    Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

    2. LDAC Mode
    Use the app to switch to LDAC mode (only available on Android 8.0 and above).
  • How do I turn off Motion X600's voice prompts?
    1. Connect your device to Motion X600.
    2. Download and open the soundcore app.
    3. Press the top right corner to access more options.
    4. Turn off voice prompts.
  • How do I update Motion X600's firmware?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app, then press Update Firmware.
    3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
    4. Motion X600 will restart automatically after updating successfully.
  • Does spatial audio require a specific music format?
    No.
  • What is spatial audio and how do I turn it on?
    Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
  • What is LDAC?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

    Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
  • How do I use LDAC?
    On a device powered by Android 8.0 or above, do the following:
    1. Open the soundcore app.
    2. Go to the Settings
    3. Click on Sound Mode
    4. Select Preferred Audio Quality and switch to LDAC codec.

    Notes:
    • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
    • LDAC provides higher quality sound but increases power consumption and reduces playtime.
    • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
  • Why do some devices experience interrupted sound when using the LDAC function?
    After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

    If you would like to select 990 kbps LDAC, we recommend following these steps:

    1. Turn off Wi-Fi on your Android device.
    2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
    3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
    4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
    5. Play local music files.
  • How can I TWS pair two Motion X600 speakers at the same time?
    Method 1.
    1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The master speaker is the one with the blue light.
    6. Use the master speaker to pair with your device.

    Method 2.
    1. Long press the power button to start both speakers
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

    Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
  • How does stereo sound work during TWS pairing?
    When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
  • I can't detect Motion X600 via Bluetooth. What should I do?
    1. Fully charge the speaker.
    2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    3. Turn your device and your device's Bluetooth off and on.
    4. Clear all pairing records on your device.
    5. Restart your speaker and reconnect to it.
    6. Try the speaker with different devices if possible.
  • How do I use the EQ?
    Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
  • Can I increase the bass on my Motion X600?
    You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
  • How can I share a custom EQ?
    1. Download the soundcore app.
    2. Pair Motion X600 with the soundcore app.
    3. Click Equalizer.
    4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

    Note: To use the sharing function, you need to log in to your soundcore account first.
  • How do I import a custom EQ that someone has shared with me?
    Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
    Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
    Click "Yes" and then click "Import".

    Method 2: Scan the QR Code
    Open the soundcore app and pair with Motion X600.
    Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
  • QSG

    A3130-QSG

    2023-05-08

  • Manual

    A3130-Manual

    2023-05-08

    • What's in the box?
      Motion X600 Speaker
      60 cm USB-C to C Cable
      Safety Card
      Quick Start Guide

      Note: Aux cable and wall charger are not included!
    • How long does it take to charge Motion X600?
      It takes around 6 hours to charge with a certified 5V/3A wall charger.
    • How do I reset Motion X600?
      Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
    • Is Motion X600 waterproof?
      Motion X600 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover on the back is securely fastened.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • Does Motion X600 have a built-in microphone?
      Yes.
    • Can I get stereo sound when using one Motion X600?
      Yes, you can get the stereo sound with single Motion X600 speaker. The left side plays left channel, the right side plays right channel.
    • Why is the battery life less than 12 hours?
      12-hour battery life is based on measurements taken at 1/4 power and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Where can I download the soundcore app?
      Download the soundcore app from Google Play, the Apple App Store, or by scanning the QR code below, then you can experience the full range of Motion X600's features, including:

      1. Customizable EQ
      Customize the Pro EQ to get the sound you want for any style of music. You can also share your customized EQ with friends.

      2. LDAC Mode
      Use the app to switch to LDAC mode (only available on Android 8.0 and above).
    • How do I turn off Motion X600's voice prompts?
      1. Connect your device to Motion X600.
      2. Download and open the soundcore app.
      3. Press the top right corner to access more options.
      4. Turn off voice prompts.
    • How do I update Motion X600's firmware?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app, then press Update Firmware.
      3. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background.
      4. Motion X600 will restart automatically after updating successfully.
    • Does spatial audio require a specific music format?
      No.
    • What is spatial audio and how do I turn it on?
      Spatial audio places sound all around you to create an immersive listening experience. Simply press the Spatial Audio button to turn on.
    • What is LDAC?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of ordinary Bluetooth SBC.

      Note:LDAC only works on devices running Android 8.0 or above, it doesn't works on iPhone devices.
    • How do I use LDAC?
      On a device powered by Android 8.0 or above, do the following:
      1. Open the soundcore app.
      2. Go to the Settings
      3. Click on Sound Mode
      4. Select Preferred Audio Quality and switch to LDAC codec.

      Notes:
      • It takes about 10 seconds to switch audio codecs. You may be required to update the speaker's firmware if available. Do not use the app or speaker while updating.
      • LDAC provides higher quality sound but increases power consumption and reduces playtime.
      • Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
    • Why do some devices experience interrupted sound when using the LDAC function?
      After enabling LDAC, your device will default to adaptive bit rate mode. Generally, there won't be any sound interruptions, however, if Android users turn on developer mode and select LDAC 990 kbps playback, sound may slightly cut in and out.

      If you would like to select 990 kbps LDAC, we recommend following these steps:

      1. Turn off Wi-Fi on your Android device.
      2. Turn off any extra Bluetooth and Wi-Fi devices in the room.
      3. Connect your Android device to Motion X600 via Bluetooth and switch to 990 kbps.
      4. Keep the distance between the Android device and Motion X600 within 0.5 m (1.6 ft).
      5. Play local music files.
    • How can I TWS pair two Motion X600 speakers at the same time?
      Method 1.
      1. Speaker 1 and Speaker 2: Long press the power button to start both speakers.
      2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
      3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
      5. The master speaker is the one with the blue light.
      6. Use the master speaker to pair with your device.

      Method 2.
      1. Long press the power button to start both speakers
      2. Connect either speaker with your Bluetooth device.
      3. On both speakers, press and hold the Bluetooth button for at least 2seconds to enter TWS pairing mode.
      4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.

      Note: To exit TWS mode, hold the Bluetooth button for at least 2 seconds.
    • How does stereo sound work during TWS pairing?
      When you have two Motion X600 speakers paired at the same time, the master speaker supports left channel and sky channel(if the spatial audio is turned on), while the secondary speaker supports right channel and sky channel(if the spatial audio is turned on).
    • I can't detect Motion X600 via Bluetooth. What should I do?
      1. Fully charge the speaker.
      2.Turn on the speaker, then hold the Bluetooth button and volume up button simultaneously for 5-10 seconds to reset the speaker.
      3. Turn your device and your device's Bluetooth off and on.
      4. Clear all pairing records on your device.
      5. Restart your speaker and reconnect to it.
      6. Try the speaker with different devices if possible.
    • How do I use the EQ?
      Open the soundcore app and go to Equalizer > Custom > Full-Band. Then click any dot to expand the corresponding frequency band, long press the dot and drag to customize the frequency.
    • Can I increase the bass on my Motion X600?
      You can download the soundcore app and pair the speaker with soundcore app to enhance the bass via the EQ. The audio source quality might also affect the performance of the bass. Try using high-quality audio files or streaming services.
    • How can I share a custom EQ?
      1. Download the soundcore app.
      2. Pair Motion X600 with the soundcore app.
      3. Click Equalizer.
      4. Click the share button in the upper right corner, then click Copy Link or QR Code. You can choose an app to share the link or the QR Code with your friends.

      Note: To use the sharing function, you need to log in to your soundcore account first.
    • How do I import a custom EQ that someone has shared with me?
      Method 1: Copy the Link (Note: The link must be the EQ link of Motion X600 generated in the soundcore App)
      Open the soundcore app and pair with Motion X600, then copy the EQ link, the link will automatically be detected and you will be asked whether or not your want to import it.
      Click "Yes" and then click "Import".

      Method 2: Scan the QR Code
      Open the soundcore app and pair with Motion X600.
      Go to Equalizer > Add > Scan Code for EQ. Then scan the QR code your friend shared with you and click "Import".
    • QSG

      A3130-QSG

      2023-05-08

    • Manual

      A3130-Manual

      2023-05-08

Customer Reviews

Based on 308 reviews
88%
(270)
12%
(38)
0%
(0)
0%
(0)
0%
(0)
P
Peter Mraz
Beautiful sound

On of my best speakers ever . Guys from soundcore did great job

M
Mariusz
Zajefajne!!!!

Witam wszystkich szukających recenzji tego głośnika.
Zacznę od plusów. Kupiłem 2 głośniki w celu połączenia w stereo. Efekt zaskoczył mnie niesamowicie. Uczucie przy słuchaniu takie jak w słuchawkach. Dźwięk stereo niesamowity. Nie da się uzyskać dźwięku 3d jak w słuchawkach ale w zasadzie po co. Jakość dźwięku naprawdę niesamowita i wszystkie porównania i opisy tego głośnika nie kłamią. Grają naprawdę wspaniale. Własnymi ustawieniami korektora można wyciągnąć naprawdę dużo. Co bym zmienił? Na pewno poprawił bas. W tych głośnikach nie posłuchasz muzyki elektronicznej gdzie przebija się wyraźnie brzmienie basowe. Gatunki jak jazz, country, blues i klasyczny rock to środowisko tego sprzętu. Reszta oczywiście do posłuchania na pół gwizdka i coś tam basu słychać ale to nie łupanka dla sąsiadów. Kupiłem głośniki do kompletu z projektorem 4k w celu projekcji letnich na ścianie 250 cali i problem basu w filmach rozwiązałem podłączając oba głośniki soundcore i komputerowy subwoofer po kablu aux. Dźwięk atmos na tych 3 głośnikach zbliżony do klinowego więc da się dostosować sprzęcik do potrzeb. Kończąc polecam zakup głośnika w trybie stereo (x2) i delektować się muzyką doskonałej jakości otaczającą ze wszystkich stron

C
Customer
This is a masterpiece

This is the best sound I’ve ever heard in a box this size. It’s sound quality is phenomenal, there is the smoothest bass even at low volumes and the build quality is like in the 1000$ range. After optimizing the eq it is as crisp as in real life. The special audio works on this one for real. It is the best value 150$ gets you these days.

A
Antoni Sikora
Amazing quality as always from Soundcore/Anker

The quality of the build - 10/10, weighs a little, but the metal used here is extremely high quality, and it's very durable, so it won't break easily
The handle - very nice, makes it much easier to carry because of the weight its a must use
The buttons - pretty similar to my Soundcore boost, but still somehow a little better ( I think it's about the deepness of the buttons, it's a little deeper than on soundcore boost)
The battery life - expected from the power and size of the speaker, around 9h on 50% power and spatial audio on
And the most important two:
About the main speaker: full of vocals, full of bass and instruments, loud on 50%, for me it's not nice to listen over that
The spatial speaker: very nice addition, like it very much, makes the expierence more immersive than ever!
20/10 recommend it to everyone (look for sales, because it's really expensive)

P
Peter Hatos
With the 'Poweramp' app, the Motion X600 sounds much nicer!

A very important plus can be added to the Motion X600 sound, which gives a much better sound quality:

Android's mobile phone can be downloaded with an app called "Poweramp" - just a few dollars. This app brings the maximum out of the speakers! I did it like this:

1. First you need to set the Poweramp EQ to your liking. (There are plenty of setup options!)
2. Then set the SoundCore App EQ. The two Equalizers, together, give plenty of high -height and high sounds. The deep sounds also improve a lot, though they are a bit weak (but this is probably because of the loudspeaker size).
3. Set LDAC on your mobile phone.
4. Set LDAC on the Motion X600.

So the Motion X600 gives a stronger and more beautiful, clearer sound!
Anyone who uses the speaker without the Powermp will never know what the Motion X600 can do! And a minimum CD disc quality music. Or better try 24-96 quality!

I would say that maybe it would be good if the metal handle could be removed. Or it would be folded. The industrial exterior is beautiful and clean, the speaker gives a massive impression. The battery life is good, but it is not good to recharge slowly.

LDAC (hi-res, hi-res Wireless) is very important and good plus. That's why I chose the Motion X600.
And maybe there will be LHCD Kodek in a new update ...?

Sign In to Receive
the Coupon Below
*Sorry, your account contains sensitive data. Please verify your account by email. Send again Send again in seconds
Register
Already signed up? Sign in Now
Sign In to soundcore
Quick Sign In
Sign In with Password
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Sign In to soundcore
Email address
Password
Forget password?
Send again Send again in seconds
or
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
We've Sent You a Verification Email
Please check the verification email sent to

You have to verify your account before using it.

The verification link is valid for the next 30 minutes.

There may be a few minutes of delay.

You can set your password in the My Account section.

You can use the email verification link to sign into the website each time.

Didn't receive a verification email? Send again Send again in seconds
Go Back
OK
Please try again in 10 minutes.
A verification email has been sent to your email address, please check it.
Welcome to the soundcore Collective
Here's your coupon
  • %
    Off
    Code: COPY

1. Your initial password and coupon have been sent to your email address.

2. Verify your email address for account security and credit distribution.Send again Send again in seconds

OK,Get it
Registration Failed
Sorry, your link is not working, please register again!
OK
Enter your phone number to subscribe to SMS alerts.
By subscribing, you agree to receive recurring automated promotional and personalized marketing text messages and phone calls from soundcore at the provided phone number. Consent is not a condition of any purchase. Reply HELP for help and STOP to unsubscribe. Message frequency will vary. Message and data rates may apply. View Terms & Privacy.
Mobile Number
*There seems to be something wrong.
The interface returns failure and will be skipped after 5 seconds.
Subscribe
Skip